"I hired Stucco Experts to do the foundation on my house and the garage. They were very responsive to coming out and doing an estimate. They came on time to start the job, were very efficient, professional and did a fantastic job! They cleaned up after they were complete. Very happy with the results! I would highly recommend them!"
Masonry Services in Calgary: Repair, Restoration & Repointing
Brick matching, stone matching, mortar repointing, chimney repair, and deck column rebuilds. Every repair Agim completes follows a single standard: when the work is finished, you should not be able to find it.
What we repair, and what we don't
Agim's masonry services in Calgary focus entirely on repair and restoration of existing brick, natural stone, and cultured stone installations. This is not a new-build masonry service. Repair and restoration demand a different skill set, and matching existing materials requires more precision than starting fresh with new ones.
Brick repair & replacement
Cracked or displaced bricks, weathered units, mortar joint failures on residential exteriors.
Stone repair
Natural stone and cultured stone repair on walls, facades, and columns. Sourced and matched to the original install.
Mortar repointing
Deteriorated mortar removed and replaced for brick and stone, matching colour, composition, and joint profile.
Chimney repointing & crowns
Full repointing, crown repair and sealing, replacement of cracked or spalled bricks, flashing-line restoration.
Deck column rebuilds
Stone-wrapped deck columns and porch pillars rebuilt and re-sealed against future water entry.
Stone wrap restoration
Damaged stone wraps restored with attention to the original layout pattern and joint rhythm.
Why a visible patch is a failed repair
Structural integrity matters. A repair that prevents water infiltration and restores load-bearing capacity solves the functional problem. But a repair that leaves a visible colour mismatch, an inconsistent mortar profile, or a brick that clearly does not belong solves only half the problem.
Agim treats visible patch lines as failures, regardless of how solid the underlying repair is. A homeowner who pays for masonry repair should not spend the next ten years staring at evidence of the fix.
This philosophy separates Agim's approach from generic masonry repair in Calgary. Many contractors complete structurally adequate repairs that remain permanently visible because they skip the colour-matching step or source the closest available brick rather than the correct one.
- 1. The material
Brick by manufacturer, era, and colour range. Stone by product line and texture.
- 2. The mortar colour
Hand-tinted to blend with aged grout lines, not just specified by code.
- 3. The joint profile
Concave, flush, raked, or weathered, depending on the existing pattern.
Getting two out of three right still produces a visible patch.
Stone and brick matching: how we make repairs disappear
For brick replacement, Agim sources matching brick by manufacturer, era, and colour range. Calgary homes built between 1970 and 2010 use a wide variety of brick types, and finding the right match sometimes requires contacting salvage suppliers or testing multiple options against the existing wall under natural light.
For natural stone and cultured stone, the matching process involves identifying the original product line, sourcing replacement pieces, and in some cases hand-tinting mortar to blend with aged grout lines. Cultured stone presents a specific challenge: manufacturers update their moulds and colour palettes every few years, which means a stone installed in 2012 may not have an identical off-the-shelf match in 2024.
Agim brings the same colour-matching precision to masonry that he applies to his stucco work. That skill transfers directly to mortar and stone matching.
Before/after: natural stone repair with matched stone, Calgary.
Mortar joint repointing for brick and stone
Repointing replaces deteriorated mortar between bricks or stones without removing the masonry units themselves. In Calgary, mortar joints typically degrade faster than the brick or stone they hold together, which makes repointing one of the most common and most cost-effective masonry repairs available.
- Step 1
Removal
Failing mortar removed to a minimum depth of 15mm using hand tools to avoid damaging adjacent brick or stone faces.
- Step 2
Application
New mortar matched to the original colour, composition, and joint profile (concave, flush, raked, or weathered).
- Step 3
Curing & inspection
Confirm new joints blend with the surrounding wall under both direct sunlight and shade before sign-off.
Poorly executed repointing, where new mortar sits on top of old mortar rather than replacing it, fails within 2 to 3 Calgary winters. Agim removes deteriorated material to full depth before applying new compound, ensuring the repair bonds properly and lasts through repeated freeze-thaw exposure.
Chimney repair and repointing in Calgary
Chimneys take more weather damage than any other masonry element on a Calgary home. They sit above the roofline, fully exposed to wind, rain, snow, and direct sun on all four sides. While a brick wall benefits from roof overhangs and partial shelter, a chimney absorbs every temperature swing and every drop of moisture the sky delivers.
Home inspectors and roofers flag chimney mortar deterioration more than any other masonry issue in Calgary pre-sale inspections. If a roofer or inspector told you your chimney needs repointing, that assessment is almost certainly accurate.
Chimney mortar exposed to Calgary's climate deteriorates on a predictable timeline, and once cracking begins, water infiltration accelerates the damage with every freeze-thaw cycle.
Send a photo from ground level. Agim can assess most chimney issues from a clear image and provide an estimate before scheduling ladder access.
- Full chimney repointing (all four sides, crown to flashing line)
- Chimney crown repair and sealing
- Replacement of cracked or spalled chimney bricks
- Flashing-line mortar restoration
Got a chimney flagged by an inspector?
Send us a photo for a fast assessment. Most chimney issues can be diagnosed from a clear ground-level image.
Before/after: deck column rebuild with natural stone finish, Calgary.
Deck column rebuilds and stone wrap repair
Stone-wrapped deck columns and porch pillars rank among the most visible masonry elements on Calgary homes. When a stone wrap cracks, shifts, or loses pieces, the damage sits at eye level near the front entrance, making the deterioration impossible to ignore.
Deck column failures typically start in one of two places: the base (where ground-level moisture and snow contact erode the mortar) or the cap (where water pools and seeps downward through vertical joints). Agim repairs both conditions by removing damaged sections, rebuilding with matched stone, and sealing vulnerable joints against future water entry.
Column rebuilds require careful attention to the original stone layout pattern. Random-looking stone installations actually follow specific placement rhythms. Agim photographs the existing column from multiple angles before disassembly, then reconstructs the section to mirror the original arrangement.
Why Calgary's climate is hard on masonry
Calgary experiences an average of 30 to 40 freeze-thaw cycles per year, according to Environment and Climate Change Canada weather data. Each cycle pushes moisture into mortar joints and micro-cracks during warm periods, then expands that moisture by approximately 9% when temperatures drop below freezing.
A hairline mortar crack in year one becomes a 3mm gap by year three, allowing significantly more water penetration and faster deterioration with each subsequent winter. Calgary's chinook winds intensify the problem by creating rapid temperature swings of 15 to 20°C within hours, which no other major Canadian city experiences at the same frequency.
The practical result: masonry repair in Calgary is not a one-time event. Even well-executed repairs have a finite lifespan because the climate continuously works against mortar and stone. Homeowners who understand this cycle invest in proper repairs that maximize the interval between service visits.
What Calgary homeowners say
Verified reviews from real clients across Calgary and surrounding areas.
"Agim and his team are such professionals! They do amazing, high quality work and provide very good service. Very easygoing, and very good prices as well. We were very happy with the outcome of our stucco. It looks beautiful! Highly recommend!!"
"Agim was recommended for our stucco patching after window installation. He was meticulous and it is apparent he takes great pride in his work. He answered all of our questions, and took the time to explain what he was doing. We found Agim's pricing to be very reasonable, and his efforts to be available when needed were greatly appreciated. Our stucco looks great, and we are extremely happy we went with Stucco Experts. We wouldn't hesitate to book again in the future, and highly recommend this company for stucco work!"
"It was a small job, but they came in a timely fashion and fixed the problem quickly. And they did a great job too! Highly recommended. Would use them again."
"Agim was professional. He did a great job on the stucco repair and painting."
"Really happy with Agim's service, he is meticulous and kind. We definitely recommend him."
Get a quote: send us a photo
The fastest path to an accurate masonry repair estimate. Agim reviews every submission personally and most photo submissions receive a response within 24 hours.